{"title":"Levelling System \u0026 Spacers","description":"","products":[{"product_id":"levtec-levelling-system-wedges-250pck","title":"Levelling System Wedges - 250pc","description":"Offers precision spaced joints, the optimum system for levelling tiles for the avoidance of lippage\u003cbr\u003e\u003cstrong\u003eHow to create the perfect finish with LevTec wedges\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eStep 1\u003cbr\u003eSpread the tile adhesive and lay the tile, then position the LevTec clips beneath the edge of the tile. The clip will act as 1.5mm spacer when pressed firmly against the tile.\u003cbr\u003e\u003cbr\u003eStep 2\u003cbr\u003eSet the adjacent tile firmly into the adhesive, butted against the LevTec clip. Then slide the LevTec wedges through the clip until both tiles are firmly levelled.\u003cbr\u003e\u003cbr\u003eStep 3\u003cbr\u003eOnce the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joint width can be adjusted slightly during setting, without disrupting the height of the tiles.\u003cbr\u003e\u003cbr\u003eStep 4\u003cbr\u003eOnce the adhesive is set the LevTec wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile ready for grouting.","brand":"LevTec","offers":[{"title":"Default Title","offer_id":53559309631827,"sku":"ATC184","price":40.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Wedges.png?v=1776960973"},{"product_id":"levtec-levelling-system-clips-500pc","title":"Levelling System Clips - 500pc","description":"Designed for tiles for thickness between 3 and 12mm\u003cbr\u003eSnaps off  below the breakpoint leaving the tiles ready to grout.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to create the perfect finish with LevTec clips\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eStep 1\u003cbr\u003eSpread the tile adhesive and lay the tile, then position the LevTec clips beneath the edge of the tile. The clip will act as 1.5mm spacer when pressed firmly against the tile.\u003cbr\u003e\u003cbr\u003eStep 2\u003cbr\u003eSet the adjacent tile firmly into the adhesive, butted against the LevTec clip. Then slide the LevTec wedge through the clip until both tiles are firmly levelled.\u003cbr\u003e\u003cbr\u003eStep 3\u003cbr\u003eOnce the tiles are locked in place, the clips and wedges need to stay in position until the adhesive sets. The joint width can be adjusted slightly during setting, without disrupting the height of the tiles.\u003cbr\u003e\u003cbr\u003eStep 4\u003cbr\u003eOnce the adhesive is set the wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile ready for grouting.","brand":"LevTec","offers":[{"title":"Default Title","offer_id":53559309664595,"sku":"ATC180","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Clips.png?v=1776960972"},{"product_id":"levtec-pliers","title":"Pliers","description":"Allows wedges to be inserted through clips easily, to ensure level floors and walls.\u003cbr\u003e\u003cstrong\u003eLEVTEC - THERE IS NO SIMPLER WAY TO ENSURE PERFECT TILING!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe range includes clips, wedges and pliers which lock tiles in place to prevent slumping during drying, while also removing substrate imperfections. Their interlocking design holds the tiles together, while eliminating the effects of adhesive shrinkage and gravity issues. This unique system will enable professional tilers to set floor and wall tiles without lippage, until the adhesive is fully dry.\u003cbr\u003e\u003cbr\u003eThe clips are simple and quick to use thanks to their bevelled clip edges, with a strong and flexible design which does not suffer from accidental breakages. Unlike other clip and wedge-based levelling systems, the breakpoint is below the base plate, allowing total expansion once removed. In addition, the reinforced reusable wedges are designed to provide complete accuracy, so every tiling project benefits from a faultless surface.\u003cbr\u003e\u003cbr\u003eStandard clip designed for tiles with a thickness between 3 and 12mm - 1.5mm tile spacer.\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eHow to create the perfect finish with LevTec pliers\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eStep 1\u003cbr\u003eSpread the tile adhesive and lay the tile, then position the LevTec clips beneath the edge of the tile. The clip will act as 1.5mm spacer when pressed firmly against the tile.\u003cbr\u003e\u003cbr\u003eStep 2\u003cbr\u003eSet the adjacent tile firmly into the adhesive, butted against the LevTec clip. Then slide the LevTec wedges through the clip until both tiles are firmly levelled.\u003cbr\u003e\u003cbr\u003eStep 3\u003cbr\u003eOnce the tiles are locked in place using the LevTec pliers, the clips and wedges need to stay in position until the adhesive sets. The joint width can be adjusted slightly during setting, without disrupting the height of the tiles.\u003cbr\u003e\u003cbr\u003eStep 4\u003cbr\u003eOnce the adhesive is set the LevTec wedges can be removed using a rubber mallet. The clips should be hit in the direction of the tile joint, where they will dislodge from the breakpoint below the tile ready for grouting.","brand":"LevTec","offers":[{"title":"Default Title","offer_id":53559310057811,"sku":"ATC185","price":25.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Pliers.png?v=1776960973"},{"product_id":"tileasy-tile-wedge-levelling-base-2mm-grout-joints","title":"Tile Wedge Levelling Base – 2mm - 100pc","description":"\u003cp\u003eTileasy Tile Wedge Levelling Base 2mm (100 pack). This product is designed to help you create a level surface when you are tiling a floor. It will provide accurate measurements and will ensure your tiling work is nicely level and equal meaning it will look balanced as well as feel balanced. It is essential for those carrying out tiling work and this product can also be used with tileasy's pliers.\u003c\/p\u003e","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559313793363,"sku":"TWLB100\/2mm","price":13.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/TWLB100-2mm.png?v=1776960988"},{"product_id":"tileasy-tile-wedge-levelling-base-3mm-grout-joints","title":"Tile Wedge Levelling Base - 3mm","description":"\u003cp\u003eThis product is designed to help you create a level surface when you are tiling a floor. It will provide accurate measurements and will ensure your tiling work is nicely level and equal meaning it will look balanced as well as feel balanced. It is essential for those carrying out tiling work and this product can also be used with tileasy's pliers.\u003c\/p\u003e","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559313826131,"sku":"TWLB100\/3mm","price":13.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/TWLB100-3mm.png?v=1776960989"},{"product_id":"tileasy-tile-levelling-wedges","title":"Tile Levelling Wedges - 100pc","description":"This Pack of 100 Tile Wedges are to be used in conjunction with the Tile Bases and Pliers as a levelling system.\u003cbr\u003e\u003cbr\u003eThis is to help create a level surface when you are tiling a floor.","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559314448723,"sku":"TWL","price":15.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/TWL-1-1.png?v=1776960991"},{"product_id":"tileasy-tile-levelling-bases-xl","title":"Tile Levelling Bases XL","description":"To be used for both floor and wall, our levelling bases and wedges will help you achieve a level tiled surface. The levelling bases are available in both 1 and 2mm grout joints, for use with tile thickness from 3 – 12mm.\u003cbr\u003e\u003cbr\u003eThe tile levelling wedges and levelling pliers are sold separately.","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559314481491,"sku":"TWLXL100\/3mm","price":14.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/TWL.png?v=1776960991"},{"product_id":"tileasy-tile-y-spacers-3mm","title":"Y-Spacers - 3mm","description":"\u003cp\u003eY-Spacers make tiling hexagonal tiles very simple. Y-spacers are ideal for the even spacing of hexagonal tile patterns. Ensures a more professional tiling finish and precise grout line. Available in both 2 and 3mm.\u003c\/p\u003e","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559314776403,"sku":"YS250\/3MM","price":5.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/YS250-2MM-3MM.png?v=1776960991"},{"product_id":"tileasy-tile-y-spacers-2mm","title":"Y-Spacers - 2mm","description":"\u003cp\u003eY-Spacers make tiling hexagonal tiles very simple. Y-spacers are ideal for the even spacing of hexagonal tile patterns. Ensures a more professional tiling finish and precise grout line. Available in both 2 and 3mm.\u003c\/p\u003e","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559314940243,"sku":"YS250\/2MM","price":5.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/YS250-2MM-3MM_d6496d3c-2b5b-4527-9e89-7db48e096f1b.png?v=1776960993"},{"product_id":"2mm-t-tile-spacers-250pcs","title":"T-Spacers 2mm - 250pcs","description":"\u003cp\u003eT Spacers - pack of 250\u003cbr\u003e\u003cbr\u003e2mm\u003c\/p\u003e","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559324606803,"sku":"TS250\/2mm","price":6.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/TS250-2mm.png?v=1776961030"},{"product_id":"rubi-tile-levelling-system-delta-levelling-wedge-n","title":"Delta Levelling Wedge - 100pk","description":"The DELTA TILE LEVELING SYSTEM wedges from RUBI allow even pressure to be exerted on the tiles to obtain optimum levelling of the tiles. The system of horizontal placement of the DELTA TILE LEVELING SYSTEM wedges allows a first quick and intuitive installation, by hand, to finally make the final pressure with the DELTA nippers without effort or delay.\u003cbr\u003e\u003cbr\u003eManufactured in PP, which allows these items to be reused several times, thanks to its high strength. The DELTA wedges can be purchased in bags of 100, 200 and 400 units, respectively, and in a large volume box of 1200 units, thus allowing savings in investment in the levelling system components.\u003cbr\u003e\u003cbr\u003eIdeal for laying large format tiles (minimum size required: 12” x 12”) and thicknesses of 1\/8”-1\/2”, 1\/4\"-9\/16” or 7\/16”-13\/16” (depending on the model of the DELTA LS strips) using the back-buttering technique.","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559328211283,"sku":"03952","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-03952.png?v=1776961041"},{"product_id":"rubi-delta-level-system-strip-3-12mm-3mm-b-200un","title":"Delta Level System Clips 3-12mm 3mm - 200pk","description":"The main function of the RUBI DELTA level system is to avoid lippage during the installation process tiles both on floors and walls.\u003cbr\u003e\u003cbr\u003eThe DELTA level system also prevents the movement of the tiles during the setting of the adhesive and during installation, the number of corrections in the position of the tile itself is reduced.\u003cbr\u003e\u003cbr\u003eThe basic principle of the DELTA level system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.\u003cbr\u003e\u003cbr\u003eThe use of the RUBI DELTA level system is fast, easy and intuitive. Once the installation is complete, the strips are removed by impact (kick or mallet), striking the strips always in the direction of the joint. The DELTA level system wedges can be reused many times.\u003cbr\u003e\u003cbr\u003eThe RUBI DELTA LEVEL SYSTEM pliers are designed to be used both in installation work of horizontal (floor) and vertical (wall) tiles.\u003cbr\u003e\u003cbr\u003eThe main function of the RUBI DELTA level pliers are to give the wedge the necessary pressure to allow the leveling of the tile; thus obtaining a perfectly flat surface.","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559328702803,"sku":"02867","price":11.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02867.png?v=1776961042"},{"product_id":"rubi-delta-level-system-strip-3-12mm-3mm-b-100un-product-reference","title":"Delta Level System Clips 3-12mm 3mm 1000pk","description":"\u003cp\u003eThe main function of the RUBI DELTA level system is to avoid lippage during the installation process tiles both on floors and walls.\u003cbr\u003e\u003cbr\u003eThe DELTA level system also prevents the movement of the tiles during the setting of the adhesive and during installation, the number of corrections in the position of the tile itself is reduced.\u003cbr\u003e\u003cbr\u003eThe basic principle of the DELTA level system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.\u003cbr\u003e\u003cbr\u003eThe use of the RUBI DELTA level system is fast, easy and intuitive. Once the installation is complete, the strips are removed by impact (kick or mallet), striking the strips always in the direction of the joint. The DELTA level system wedges can be reused many times.\u003cbr\u003e\u003cbr\u003eThe RUBI DELTA LEVEL SYSTEM pliers are designed to be used both in installation work of horizontal (floor) and vertical (wall) tiles.\u003cbr\u003e\u003cbr\u003eThe main function of the RUBI DELTA level pliers are to give the wedge the necessary pressure to allow the levelling of the tile; thus obtaining a perfectly flat surface.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559328735571,"sku":"02866","price":5.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02866.png?v=1776961043"},{"product_id":"rubi-delta-level-system-strip-3-12mm-2mm-b-400un","title":"Delta Level System Clips 3-12mm 2mm -400pk","description":"The main function of the RUBI DELTA level system is to avoid lippage during the installation process tiles both on floors and walls.\u003cbr\u003e\u003cbr\u003eThe DELTA level system also prevents the movement of the tiles during the setting of the adhesive and during installation, the number of corrections in the position of the tile itself is reduced.\u003cbr\u003e\u003cbr\u003eThe basic principle of the DELTA level system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.\u003cbr\u003e\u003cbr\u003eThe use of the RUBI DELTA level system is fast, easy and intuitive. Once the installation is complete, the strips are removed by impact (kick or mallet), striking the strips always in the direction of the joint. The DELTA level system wedges can be reused many times.\u003cbr\u003e\u003cbr\u003eThe RUBI DELTA LEVEL SYSTEM pliers are designed to be used both in installation work of horizontal (floor) and vertical (wall) tiles.\u003cbr\u003e\u003cbr\u003eThe main function of the RUBI DELTA level pliers are to give the wedge the necessary pressure to allow the levelling of the tile; thus obtaining a perfectly flat surface.","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559328768339,"sku":"02854","price":25.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02852-02854_79a1cd60-7264-4f8d-b953-53023acfe3e0.png?v=1776961044"},{"product_id":"rubi-delta-level-system-strip-3-12mm-2mm-b-100un","title":"Delta Level System Clips 3-12mm 2mm -100pk","description":"The main function of the RUBI DELTA level system is to avoid lippage during the installation process tiles both on floors and walls.\u003cbr\u003e\u003cbr\u003eThe DELTA level system also prevents the movement of the tiles during the setting of the adhesive and during installation, the number of corrections in the position of the tile itself is reduced.\u003cbr\u003e\u003cbr\u003eThe basic principle of the DELTA level system is that of pressing the highest piece, until matching its position with the adjacent tiles, thus obtaining a substantial improvement of the surface flatness.\u003cbr\u003e\u003cbr\u003eThe use of the RUBI DELTA level system is fast, easy and intuitive. Once the installation is complete, the strips are removed by impact (kick or mallet), striking the strips always in the direction of the joint. The DELTA level system wedges can be reused many times.\u003cbr\u003e\u003cbr\u003eThe RUBI DELTA LEVEL SYSTEM pliers are designed to be used both in installation work of horizontal (floor) and vertical (wall) tiles.\u003cbr\u003e\u003cbr\u003eThe main function of the RUBI DELTA level pliers are to give the wedge the necessary pressure to allow the levelling of the tile; thus obtaining a perfectly flat surface.","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559329259859,"sku":"02852","price":11.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02852-02854.png?v=1776961045"},{"product_id":"rubi-tile-t-spacers-10mm-50pck","title":"T-Spacers 10mm - 50pk","description":"\u003cp dir=\"ltr\"\u003e\u003cb\u003eRUBI 02926 10mm Tile Spacers\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003eThese RUBI tile spacers are designed for use with tiles to create even spacing between tiles for event grout lines. They have a hollow structure with internal reinforcements, this allows the spacers to support tension on tiles and enables the spacers to be left in the joint and over grouted.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Quality base material\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- The hollow structure allows spacers to be left in place\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Designed for use on tiles\/paving\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Manufactured with high precision and regularity\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Total absence of rough edges.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Use only Rubi tile spacers and you will obtain the best possible finish in all your paving, tiling and flooring jobs.\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Size : 13\/32\" ( 10 mm )\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e- Qty. in Pack : 50 Pieces\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559332602195,"sku":"02926","price":5.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02926.png?v=1776961057"},{"product_id":"rubi-tile-t-spacers-3mm-200pck","title":"T-Spacers 3mm - 200pk","description":"\u003cp\u003e\u003cstrong\u003eRubi 3mm T Tile Spacers (Pack of 200)  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe T for joints RUBI form, without any doubt, a really indispensable range for obtaining perfect finishes in any work of installation of ceramic tile to breakers. RUBI manufactures the T for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs. The T for joints of 3mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The solid structure of the T for joints of 3mm has been designed to provide greater resistance to bending and crushing. These properties make the T for joints of 3mm are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eProduct Code: 02923\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 3mm\u003c\/li\u003e\n\u003cli\u003ePack Qty: 200\u003c\/li\u003e\n\u003cli\u003eT Spacers\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections\u003c\/li\u003e\n\u003cli\u003eEasier to handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559333126483,"sku":"02923","price":5.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02923-1.png?v=1776961058"},{"product_id":"rubi-tile-t-spacers-2mm-1000pck","title":"T-Spacers 2mm - 1000pk","description":"\u003cp\u003e\u003cstrong\u003eRubi 2mm T Tile Spacers (Pack of 1000) \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe T for joints RUBI form, without any doubt, a really indispensable range for obtaining perfect finishes in any work of installation of ceramic tile to breakers. RUBI manufactures the T for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs. The T for joints of 2mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The solid structure of the T for joints of 2mm has been designed to provide greater resistance to bending and crushing. These properties make the T for joints of 2mm are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eProduct Code: 02864\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 2mm\u003c\/li\u003e\n\u003cli\u003ePack Qty: 1000\u003c\/li\u003e\n\u003cli\u003eT Spacers\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections\u003c\/li\u003e\n\u003cli\u003eEasier to handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559333159251,"sku":"02864","price":10.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02864.png?v=1776961059"},{"product_id":"rubi-tile-t-spacers-2mm-300pck","title":"T-Spacers 2mm - 300pk","description":"\u003cp\u003e\u003cstrong\u003eRubi 2mm T Tile Spacers (Pack of 300) - \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe T for joints RUBI form, without any doubt, a really indispensable range for obtaining perfect finishes in any work of installation of ceramic tile to breakers. RUBI manufactures the T for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs. The T for joints of 2mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The solid structure of the T for joints of 2mm has been designed to provide greater resistance to bending and crushing. These properties make the T for joints of 2mm are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eProduct Code: 02861\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 2mm\u003c\/li\u003e\n\u003cli\u003ePack Qty: 300\u003c\/li\u003e\n\u003cli\u003eT Spacers\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections\u003c\/li\u003e\n\u003cli\u003eEasier to handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559335059795,"sku":"02861","price":4.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02561.png?v=1776961060"},{"product_id":"rubi-tile-spacers-10mm-50pck","title":"Cross Spacers 10mm - 50pk","description":"\u003cp\u003eFor wall \u0026amp; floor tiles with minimum joint. Quality base material, without impurities or imperfections.\u003cbr\u003e\u003cbr\u003e1 x Bag of 50 - 10mm Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced tile spacer, especially for large format tiles. Quality base material, free of impurities and imperfections.\u003c\/li\u003e\n\u003cli\u003eBottom frame designed for a good settlement in the grip material.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large ceramic format and rectified.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large formats and rustic.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles with thin joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for industrial or rustic tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall \u0026amp; floor tiles with minimum joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall tiles.\u003c\/li\u003e\n\u003cli\u003eHollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.\u003c\/li\u003e\n\u003cli\u003eRedesigned internal geometry. High flexural strength and crushing.\u003c\/li\u003e\n\u003cli\u003eIdeal for large formats.\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tiles in walls.\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.\u003cbr\u003e\u003cbr\u003eRUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.\u003cbr\u003e\u003cbr\u003eThe spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003eThe L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.\u003cbr\u003e\u003cbr\u003eThe RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.\u003cbr\u003e\u003cbr\u003eThe professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.\u003cbr\u003e\u003cbr\u003eThe RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.\u003cbr\u003e\u003cbr\u003eRUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559335092563,"sku":"02905","price":4.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02905.png?v=1776961061"},{"product_id":"rubi-tile-spacers-5mm-100pck","title":"Cross Spacers 5mm - 100pk","description":"\u003cp\u003e\u003cstrong\u003eRubi 5mm Tile Spacers (Pack of 100)  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe RUBI spacers are without any doubt a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile. RUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs. The spacers for joints of 5mm are recommended for the installation of ceramic tiles and pavements with minimal joint, The massive structure of the spacers for joints of 5mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 5mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan style=\"font-size: 0.875rem;\"\u003eProduct Code: 02903\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSize: 5mm\u003c\/li\u003e\n\u003cli\u003ePack Qty: 100\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections\u003c\/li\u003e\n\u003cli\u003eEasier to handle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559335125331,"sku":"02903","price":4.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02903.png?v=1776961062"},{"product_id":"rubi-tile-spacers-3mm-1000pck","title":"Cross Spacers 3mm - 1000pk","description":"\u003cp\u003eFor wall \u0026amp; floor tiles with minimum joint. Quality base material, without impurities or imperfections.\u003cbr\u003e\u003cbr\u003e1 x Bag of 1000 - 3mm Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced tile spacer, especially for large format tiles. Quality base material, free of impurities and imperfections.\u003c\/li\u003e\n\u003cli\u003eBottom frame designed for a good settlement in the grip material.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large ceramic format and rectified.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large formats and rustic.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles with thin joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for industrial or rustic tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall \u0026amp; floor tiles with minimum joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall tiles.\u003c\/li\u003e\n\u003cli\u003eHollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.\u003c\/li\u003e\n\u003cli\u003eRedesigned internal geometry. High flexural strength and crushing.\u003c\/li\u003e\n\u003cli\u003eIdeal for large formats.\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tiles in walls.\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.\u003cbr\u003e\u003cbr\u003eRUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.\u003cbr\u003e\u003cbr\u003eThe spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003eThe L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.\u003cbr\u003e\u003cbr\u003eThe RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.\u003cbr\u003e\u003cbr\u003eThe professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.\u003cbr\u003e\u003cbr\u003eThe RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.\u003cbr\u003e\u003cbr\u003eRUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559335616851,"sku":"02001","price":12.91,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02001.png?v=1776961063"},{"product_id":"rubi-tile-spacers-3mm-200pck","title":"Cross Spacers 3mm - 200pk","description":"\u003cp\u003eFor wall \u0026amp; floor tiles with minimum joint. Quality base material, without impurities or imperfections.\u003cbr\u003e\u003cbr\u003e1 x Bag of 200 - 3mm Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced tile spacer, especially for large format tiles. Quality base material, free of impurities and imperfections.\u003c\/li\u003e\n\u003cli\u003eBottom frame designed for a good settlement in the grip material.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large ceramic format and rectified.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large formats and rustic.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles with thin joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for industrial or rustic tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall \u0026amp; floor tiles with minimum joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall tiles.\u003c\/li\u003e\n\u003cli\u003eHollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.\u003c\/li\u003e\n\u003cli\u003eRedesigned internal geometry. High flexural strength and crushing.\u003c\/li\u003e\n\u003cli\u003eIdeal for large formats.\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tiles in walls.\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.\u003cbr\u003e\u003cbr\u003eRUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.\u003cbr\u003e\u003cbr\u003eThe spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003eThe L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.\u003cbr\u003e\u003cbr\u003eThe RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.\u003cbr\u003e\u003cbr\u003eThe professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.\u003cbr\u003e\u003cbr\u003eThe RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.\u003cbr\u003e\u003cbr\u003eRUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559335649619,"sku":"02902","price":3.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02902.png?v=1776961064"},{"product_id":"rubi-tile-spacers-2mm-standard-crosses-1000pck","title":"Cross Spacers 2mm - 1000pk","description":"\u003cp\u003eFor wall \u0026amp; floor tiles with minimum joint. Quality base material, without impurities or imperfections.\u003cbr\u003e\u003cbr\u003e1 x Bag of 1000 - 2mm Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced tile spacer, especially for large format tiles. Quality base material, free of impurities and imperfections.\u003c\/li\u003e\n\u003cli\u003eBottom frame designed for a good settlement in the grip material.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large ceramic format and rectified.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large formats and rustic.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles with thin joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for industrial or rustic tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall \u0026amp; floor tiles with minimum joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall tiles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.\u003c\/li\u003e\n\u003cli\u003eRedesigned internal geometry. High flexural strength and crushing.\u003c\/li\u003e\n\u003cli\u003eIdeal for large formats.\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tiles in walls.\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.\u003cbr\u003e\u003cbr\u003eRUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.\u003cbr\u003e\u003cbr\u003eThe spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003eThe L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.\u003cbr\u003e\u003cbr\u003eThe RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.\u003cbr\u003e\u003cbr\u003eThe professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.\u003cbr\u003e\u003cbr\u003eThe RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.\u003cbr\u003e\u003cbr\u003eRUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559335682387,"sku":"02000","price":8.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02000.png?v=1776961065"},{"product_id":"rubi-tile-spacers-crosses-long-leg-2mm-1000pck","title":"Cross Long Leg Spacers - 2mm - 1000pk","description":"\u003cp\u003eFor wall \u0026amp; floor tiles with minimum joint. Quality base material, without impurities or imperfections.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBag of 1000\u003c\/li\u003e\n\u003cli\u003eLong Leg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced tile spacer, especially for large format tiles. Quality base material, free of impurities and imperfections.\u003c\/li\u003e\n\u003cli\u003eBottom frame designed for a good settlement in the grip material.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large ceramic format and rectified.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large formats and rustic.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles with thin joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for industrial or rustic tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall \u0026amp; floor tiles with minimum joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall tiles.\u003c\/li\u003e\n\u003cli\u003eHollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.\u003c\/li\u003e\n\u003cli\u003eRedesigned internal geometry. High flexural strength and crushing.\u003c\/li\u003e\n\u003cli\u003eIdeal for large formats.\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tiles in walls.\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003eThe RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.\u003cbr\u003e\u003cbr\u003eRUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.\u003cbr\u003e\u003cbr\u003eThe spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003eThe L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.\u003cbr\u003e\u003cbr\u003eThe RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.\u003cbr\u003e\u003cbr\u003eThe professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.\u003cbr\u003e\u003cbr\u003eThe RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.\u003cbr\u003e\u003cbr\u003eRUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559336632659,"sku":"02972","price":13.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02972.png?v=1776961067"},{"product_id":"rubi-cross-tile-spacers-2mm-300pck","title":"Cross Spacers - 2mm - 300pk","description":"\u003cp\u003e\u003cstrong\u003eRubi 2mm Long Leg Tile Spacers (Pack of 300) \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe RUBI spacers are without any doubt a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile. RUBI manufactures spacers for joints with a high-quality base material and, for this reason, they do not present any type of imperfections or burrs. The spacers for joints of 1mm are recommended for the installation of ceramic tiles and pavements with minimal joints, The massive structure of the spacers for joints of 2mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 2mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eProduct Details \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Code: 02952\u003c\/li\u003e\n\u003cli\u003eSize: 2mm\u003c\/li\u003e\n\u003cli\u003eLong leg\u003c\/li\u003e\n\u003cli\u003ePack Qty: 300\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections\u003c\/li\u003e\n\u003cli\u003eEasier to handle\u003c\/li\u003e\n\u003cli\u003eIdeal for floor tiles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559336665427,"sku":"02952","price":4.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02952.png?v=1776961067"},{"product_id":"rubi-cross-tile-spacers-1-5mm-300pck","title":"Cross Spacers 1.5mm -300pk","description":"\u003cp\u003eFor wall \u0026amp; floor tiles with minimum joint. Quality base material, without impurities or imperfections.\u003cbr\u003e\u003cbr\u003e1 x Bag of 300 - 1.5mm Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReinforced tile spacer, especially for large format tiles. Quality base material, free of impurities and imperfections.\u003c\/li\u003e\n\u003cli\u003eBottom frame designed for a good settlement in the grip material.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large ceramic format and rectified.\u003c\/li\u003e\n\u003cli\u003eTile spacer for large formats and rustic.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles with thin joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for industrial or rustic tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for floor tiles.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall \u0026amp; floor tiles with minimum joints.\u003c\/li\u003e\n\u003cli\u003eTile spacer for wall tiles.\u003c\/li\u003e\n\u003cli\u003eHollow structure with internal reinforcements. Supports the tensions and allows to leave into the joint and to grout over.\u003c\/li\u003e\n\u003cli\u003eRedesigned internal geometry. High flexural strength and crushing.\u003c\/li\u003e\n\u003cli\u003eIdeal for large formats.\u003c\/li\u003e\n\u003cli\u003eIdeal for large format tiles in walls.\u003c\/li\u003e\n\u003cli\u003eQuality base material, without impurities or imperfections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eThe RUBI spacers are, without any doubt, a really indispensable range for obtaining perfect finishes in any installation work of ceramic tile.\u003cbr\u003e\u003cbr\u003eRUBI manufactures spacers for joints with a high quality base material and, for this reason, they do not present any type of imperfections or burrs.\u003cbr\u003e\u003cbr\u003eThe spacers for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tiles and pavements with minimal joint. The massive structure of the spacers for joints of 1, 1.5, 2 and 3 mm has been designed to provide greater resistance to bending and crushing. These properties make spacers for joints of 1, 1.5, 2 and 3 mm are highly recommended for coatings with ceramic tiles of large formats.\u003cbr\u003e\u003cbr\u003eThe L (long) versions of the 2 and 3 mm spacers are perfect, both for cladding and for paving with large-format or rectified ceramic tiles, with a thin joint.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the spacers for joints of 3 mm long and 4 mm has been designed to provide greater resistance to bending and crushing. These properties make the spacers for joints of 3 mm long are highly recommended for coatings with large format ceramic tiles.\u003cbr\u003e\u003cbr\u003eThe internal geometry of the joints for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stresses and prevent their crushing. This hollow design facilitates the entrance of the joint mortar and, if the type of installation permits, leave the spacer inside the installation joint without affecting the integrity of the joint in the future.\u003cbr\u003e\u003cbr\u003eThe RUBI reinforced 5 mm spacers are crosspieces with greater rigidity, specially designed for use on large-format floor tiles. The underside of the reinforced 5 mm spacers is designed to offer a good settlement in the grip material and to facilitate, if the type of installation allows it, the spacer is inside the installation joint without this being able to affect the integrity of it in the future.\u003cbr\u003e\u003cbr\u003eThe professional planer is very aware of the importance of using high quality separators, since the finish of his work can be seriously damaged due to imperfections and irregularities.\u003cbr\u003e\u003cbr\u003eThe RUBI spacers stand out for the regularity of their productions, the homogeneity of measurements and the absence of burrs and any other small defect. These particularities allow professionals who trust in RUBI crossheads, T and wedges to obtain excellent finishes and with total precision.\u003cbr\u003e\u003cbr\u003eRUBI is committed to quality. All our products and tools are subjected to rigorous quality exams by experienced professionals. We want all the products we have in the market to be recognized for their quality and durability. This desire has made our brand one of the most valued when it comes to providing quality solutions to the professional of laying ceramic tile and construction.\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559337189715,"sku":"02912","price":6.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02912.png?v=1776961068"},{"product_id":"rubi-tile-wedges-7-5mm-500pck","title":"Wedges 7.5mm - 500pk","description":"\u003cspan class=\"read-more-text-visible\"\u003eCeramic tile fixers, particularly for flooring jobs, know that the best possible finishes are achieved using RUBI wedges for tiling.\u003cbr\u003e\u003cbr\u003eRUBI wedges for tiling are manufactured with quality base material and are completely free from impurities and imperfections.\u003cbr\u003e\u003cbr\u003eRUBI wedges for tiling let you align the slopes and curvatures that can appear with ceramic tiles during tiling jobs.\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"read-more-text-hidden\"\u003e\u003cbr\u003eOwing to their bright red colour, RUBI wedges for tiling are easy to locate, for both fitting and removing them.\u003cbr\u003e\u003cbr\u003eRUBI wedges for tiling are 31 mm long, allowing for an easy fitting and removal.\u003c\/span\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559337255251,"sku":"02951","price":9.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02951.png?v=1776961069"},{"product_id":"rubi-tile-wedges-5mm-500pck","title":"Wedges 5mm - 500pk","description":"Ceramic tile fixers, particularly for flooring jobs, know that the best possible finishes are achieved using RUBI wedges for tiling.\u003cbr\u003e\u003cspan class=\"read-more-text-visible\"\u003eCeramic tile fixers, particularly for flooring jobs, know that the best possible finishes are achieved using RUBI wedges for tiling.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eRUBI wedges for tiling are manufactured with quality base material and are completely free from impurities and imperfections.\u003cbr\u003e\u003cbr\u003eRUBI wedges for tiling let you align the slopes and curvatures that can appear with ceramic tiles during tiling jobs.\u003cbr\u003e\u003cspan class=\"read-more-text-hidden\"\u003e\u003cbr\u003eOwing to their bright red colour, RUBI wedges for tiling are easy to locate, for both fitting and removing them.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eRUBI wedges for tiling are 31 mm long, allowing for an easy fitting and removal.","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559337812307,"sku":"02950","price":9.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Rubi-02950-pack.png?v=1776961070"},{"product_id":"gel-knee-pads","title":"Professional Knee Pads","description":"\u003cp\u003eGreat Comfort\u003c\/p\u003e\n\u003cp\u003eLight-Weight\u003c\/p\u003e\n\u003cp\u003eEasy-To-Use\u003c\/p\u003e\n\u003cp\u003eAdapts To The Users Knee\u003c\/p\u003e\n\u003cp\u003eAdjustable Straps\u003c\/p\u003e","brand":"Rubi","offers":[{"title":"Default Title","offer_id":53559363240275,"sku":"66957","price":39.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/66957_professional_knee_pads_n30092022074242.webp?v=1786459012"},{"product_id":"5mm-tile-spacers-250pcs","title":"5mm Cross Spacers (250pcs)","description":"\u003ch2\u003eTileasy 5mm Tile Spacers (250pcs)\u003c\/h2\u003e\u003cbr\u003e5mm tile spacers are available in both small and bulk quantities.\u003cbr\u003e\u003cbr\u003eQuantity: 250pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559379099987,"sku":"LS250\/5mm","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Loose-Spacers_c97fde5a-480b-482c-94e6-015804af99f4.png?v=1776961203"},{"product_id":"4mm-tile-spacers-250pcs","title":"4mm Cross Spacers - 250pc","description":"\u003ch2\u003eTileasy 4mm Tile Spacers (250pcs)\u003c\/h2\u003e\u003cbr\u003e4mm tile spacers are available in both small and bulk quantities.\u003cbr\u003e\u003cbr\u003eQuantity: 250pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559379329363,"sku":"LS250\/4mm","price":4.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Loose-Spacers_d4958d4d-be12-4e2d-bd87-8646984b7b8c.png?v=1776961204"},{"product_id":"3mm-tile-spacers-250pcs","title":"3mm Cross Spacers - 250pc","description":"\u003ch3\u003eTileasy 3mm Tile Spacers (250pcs)\u003c\/h3\u003e\u003cbr\u003e3mm tile spacers are available in both small and bulk quantities.\u003cbr\u003e\u003cbr\u003eQuantity: 250pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559379394899,"sku":"LS250-3mm","price":3.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Loose-Spacers_9d19a518-7f2a-4dde-87d1-a84685775fcd.png?v=1776961205"},{"product_id":"3mm-tile-spacers-100pcs","title":"3mm Cross Spacers -100pcs","description":"Tileasy 3mm Tile Spacers (100pcs)\u003cbr\u003e3mm tile spacers are available in both small and bulk quantities.\u003cbr\u003e\u003cbr\u003eQuantity: 100pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559379427667,"sku":"LS100\/3mm","price":2.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Loose-Spacers_3b0ae4e1-0ece-4599-8584-8507d73cec60.png?v=1776961206"},{"product_id":"2mm-tile-spacers-250pcs","title":"2mm Cross Spacers - 250pc","description":"Tileasy 2mm Tile Spacers (250pcs)\u003cbr\u003e2mm tile spacers are available in both small and bulk quantities.\u003cbr\u003e\u003cbr\u003eQuantity: 250pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559379493203,"sku":"LS250-2mm","price":2.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Loose-Spacers_ff20bf91-7164-44eb-8ad6-6d0e6d24b519.png?v=1776961207"},{"product_id":"2mm-tile-spacers-100pcs","title":"2mm Cross Spacers -100pk","description":"\u003ch2\u003eTileasy 2mm Tile Spacers (100pcs)\u003c\/h2\u003e\u003cbr\u003e2mm tile spacers are available in both small and bulk quantities.\u003cbr\u003e\u003cbr\u003eQuantity: 100pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559381131603,"sku":"LS100\/2mm","price":1.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Loose-Spacers.png?v=1776961208"},{"product_id":"levelling-pliers","title":"Levelling Pliers","description":"\u003ch2\u003eTileasy Levelling Pliers\u003c\/h2\u003e\u003cbr\u003eFor assisting with alignment (used in conjunction with tile levelling wedges\/bases).\u003cbr\u003e\u003cbr\u003eQuantity: 1pc","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559381197139,"sku":"SKU 1008","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/R66333fb4bf3f261ac4e5803b5b8a4b2a.jpg?v=1776961209"},{"product_id":"tile-levelling-bases-2mm-grout-joint","title":"Tile Levelling Bases 2mm Grout Joint","description":"\u003ch2\u003eTileasy Tile Levelling Bases 2mm Grout Joint\u003c\/h2\u003e\u003cbr\u003eTo be used for both floor and wall, levelling bases will help you achieve a level tiled surface. The levelling bases are available in both 2 and 3mm grout joints, for use with tile thickness from 3 – 12mm. Bases and wedges sold separately.\u003cbr\u003e\u003cbr\u003eSize: 2mm\u003cbr\u003e\u003cbr\u003eQuantity: 100pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559381295443,"sku":"SKU 1005","price":9.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/Ra1c4ce4122b7f10fb38952ed086a66d1.jpg?v=1776961211"},{"product_id":"tile-levelling-wedges-3-12mm-100pcs","title":"Wedges 3-12mm - 100pc","description":"\u003ch2\u003eTileasy Tile Levelling Wedges 3-12mm (100pcs)\u003c\/h2\u003e\u003cbr\u003eTo be used for both floor and wall, our levelling wedges will help you achieve a level tiled surface, along with levelling bases.\u003cbr\u003e\u003cbr\u003eThe tile levelling wedges and levelling pliers are sold separately.\u003cbr\u003e\u003cbr\u003eOne Size: 3-12mm\u003cbr\u003e\u003cbr\u003eQuantity: 100pcs","brand":"Tileasy","offers":[{"title":"Default Title","offer_id":53559381524819,"sku":"SKU 1004","price":10.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/files\/R85e4032c2aa796e2652e5ad4032b0943.jpg?v=1776961212"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1065\/5839\/0611\/collections\/LS100-2mm.png?v=1778841679","url":"https:\/\/angliatiles.co.uk\/collections\/levelling-system-spacers.oembed","provider":"Anglia Tile Centre","version":"1.0","type":"link"}